The fountain is a universal element of landscape decoration. He exquisitely fit into the composition of the suburban area, giving aesthetic pleasure, joy and peace. However, like any other monumental decoration, fountains lose their original form over time. To prevent this from happening, the owners have an important task - to properly and efficiently clean water sources. Cleaning, as a rule, is not carried out very often, but the sequence of actions should be thought out to the smallest detail. The article will tell you how to productively rid the fountain of clogging and restore its original appearance.
Causes of pollution
Loss of a source of former beauty can be associated with several factors. Among the common pollution are:
- Visible trash: leaves, dead insects, polyethylene, etc. Its appearance is due to poor layout of the water source (for example, location under a tree) or unstable weather conditions.
- Seaweed. At low temperatures, this vegetation is hardly noticeable. But if the water becomes warmer, you can see green spots, which are nothing more than algae.
- Mineral deposits. They are characteristic of fountains, as well as pools in which hard water circulates. Can form deposits, clogging canals or other elements of the water source.
- Mold, fungi.
Most owners of decorative springs panic when they discover the listed blockages. However, if you look, they are easily eliminated. It is important to detect contaminants in time, and take appropriate measures to remove them in order to extend the life of the fountain.
How and how to clean the fountain
An elementary method of purification of a water source is mechanical. It does not provide for the use of special means, and therefore can not adversely affect pets using water from the fountain. Mechanical cleaning includes filtering water, catching garbage, removing stains with brushes.
Care with the use of this technique should be regular, because it does not provide a lasting effect, especially in the warm season. A more effective way is to clean the sources with chemicals. At the moment, many products are sold to ensure normal hardness of the water and its transparency.
Important! “Chemistry” for cleaning fountains includes predominantly aggressive compounds. Their use is possible in cases where children and pets do not have access to water.
From the trash
Nets and pond vacuums will become indispensable assistants in cleaning a decorative water source. Large debris can be removed manually or caught using a net. And for small contaminants, such as sludge, organic residues, animal excrement use sludge pumps. In their configuration there are several nozzles for various types of garbage. For example, in the pond vacuum cleaner Pontec PondoMatic there are three of them and each of them perfectly performs its functions.
From mineral deposits and algae
If it is easy to get rid of garbage, then you will have to work a little with raids and greens. To remove mineral deposits, you should scoop out the contents of the source, block the water. Next up are soap solutions, brushes, sponges, chemicals. Anti-Calcite Spray type products will help to effectively cope with limescale and other visible spots. Before using chemistry on the entire surface of the water source, test its effect on a small area.
Important! For marble fountains, it is strictly forbidden to use products with an acid composition. They severely damage natural stone, corroding calcium carbonate.
If you need to clean marble or other minerals, consult your fountain installer about which chemical is best used. Self-selection of funds can lead to the loss of a spectacular appearance of the source. In addition to a cleaner, you can also be recommended a means to prevent the deposition of mineral salts and mucus. Aqualeon is a popular budget “chemistry” to prevent plaque and rust. SOLL complex-acting drugs are also effective.
As for algae, then ilosos or biological organisms that reduce the risks of flowering will help to cope with them. The latter are contained in biological products "Silushka" for fountains and ponds. It should be borne in mind that the use of microorganisms alone does not lead to the desired results and the source is still overgrown with algae. It is advisable to use Tetra AlguMin, Tetra Algizit additionally. These formulations guarantee a stable lack of greenery and clear water.
Fountain cleaning — laborious procedure requiring special knowledge and skills. Before proceeding with the removal of contaminants, you should carefully study the special literature and pay attention to the features of the source. If you are not confident in your abilities, then it is better to ask for help from professionals. Cleaning companies will quickly put the fountain in order and advise effective prevention of pollution.
