If you are interested in tropical plants that easily take root at home, then dracaena is exactly what you need. Her exotic appearance allows her to fit equally well in any interior, whether it is a living room or office space. What is worth remembering about the landing of such a universal instance and how to properly care for it in the future - you will learn about this from the article.

Dates of planting dracaena at home

Regardless of the chosen method of propagation (by seeds or cuttings), the optimal period for planting the plant is considered to be the spring period, or rather, the period from March to mid-summer. At this time, all processes of plant growth and development are slightly accelerated, so planting material is more likely to take root. To speed up the process even more, it is useful to soak the seeds in the Epina or Zircon solution.

Did you know? Dracene juice is part of the varnish for metal, and it is also able to give a permanent golden hue to human hair.

The same goes for transplanting plants from place to place. Young specimens aged 1-2 years are usually transplanted into a new pot after 2 years, and adult plants every five years of life. In autumn, the soil can only be changed as a last resort: if the plant is sick, or if it is necessary to remove dracaena from the shipping crate. In such a situation, just pay more attention to the plant and try to create the most suitable conditions for further existence.

Preparation for landing

Before planting dracaena, in addition to the seedling itself, you will also need a suitable substrate and pot. Also, we must not forget that we are talking about a tropical variety, which means that you should make sure in advance that you have all the necessary conditions in your home.

Optimal growing conditions

Whatever kind of dracaena you decide to grow in your house, any of them will require a sufficient amount of sunlight, which is why it is better to place pots with exotic on the south side of the house. At the same time, in extreme heat, it is advisable to move plants with dark green leaves to the shaded part of the apartment, otherwise spots will appear on them and they will no longer look so attractive. Bright green specimens, on the contrary, are very fond of the scattered sun's rays and calmly tolerate even the most striking effect.

Values ​​within the range of + 15 ° С in the winter and about + 20 ... + 25 ° С in the summer will be suitable for the plant, although in the latter case slight increases by several degrees are possible. In the warm season, it is useful to take the pot with dracaena out to the street, but it should only be placed in a place well protected from drafts. Optimum humidity is about 70–80%; however, in summer, the plant calmly tolerates a decrease in value. To increase the humidity in a room with a pot, you can use regular spraying from a spray bottle.

Pot selection

Choosing a pot is one of the first tasks when planting a houseplant, because the rooting and development rate of a young seedling depends on its characteristics. Assessing the selected capacity, it is worth considering both its size and the material of manufacture. For planting seeds or transplanting a sprout of dracaena, a pot with a diameter of no more than 15 cm is suitable, since in a larger amount of soil it will be difficult for the fragile rhizome to maintain the plant in an upright position.In the future, as you grow, the size of the selected containers can be increased by 2-2.5 cm in width and about 5 cm in height. As for the material for making the flower pot, many flower growers choose ceramic products, arguing that the naturalness and porosity of the material that protects the plant from waterlogging. However, plastic containers are much cheaper, and many options have drainage holes.

Important! If the ceramic pot is additionally covered with glaze, then the high drainage properties of the material can no longer be hoped for. In this case, it is worthwhile to lay broken brick or other suitable drainage at the bottom of the tank.

At the initial stages of the development of dracaena, this is quite enough, and for the grown tree you can purchase more stable ceramic containers. The shape of the pot can be any - the main thing is that it provides good stability and does not turn over under the weight of the grown tree.

Preparation of soil for planting

There are two ways to get a suitable primer for dracaena: by buying it in a flower shop or by cooking it yourself. In the latter case, all you need is turf (or leaf) land, humus, peat and sand, taken in equal parts.An alternative would be a substrate of 3 parts of garden soil, one part of peat and the same amount of coarse sand. To remove excess moisture, in any case, you need a good drainage layer of expanded clay or crushed brick, at least 3 cm thick.

How to plant dracaena at home

For planting dracaena, completely different planting material obtained from the mother bush is suitable. Most often, this role is played by layering and cuttings, although sometimes flower growers sow seeds in pots. Each of the methods has its own advantages and disadvantages, which largely depend on the correctness of the landing itself.

Layering

With the help of layering, you can get a new, well-rooted plant, without its separation from the mother bush. The sequence of all actions in this case is as follows:

1. Remove the leaves from the stem of the dracaena.
2. Make an incision under the knot, leading it to the middle of the trunk.
3. Insert a match, a small piece of plastic, or another solid object into it.
4. In the same place, fix a plastic bag with sphagnum moss or peat placed in it. Close it.
5. In the future, it will be necessary to inject water into the same bag, which is most convenient to do with a syringe (the substrate should remain slightly moist all the time).
6. After the cut part forms its root system and grows sufficiently, completely cut off the tip and transplant the lay in a constant container.

For propagation of dracaena by layering, any time of the year is suitable, but it is best to postpone the procedure to springtime, when the plant will gain enough strength after hibernation.

Important! The incision tool must be sanitized so that the dracaena does not suffer from infection. At a minimum, the knife blade must be wiped with alcohol.

Seeds

This variant of reproduction of the described plant is most often used for green-leaf varieties that germinate faster. A good time for sowing is March-April, and peat-sand mixture can be used as a substrate. The landing procedure is carried out in several stages and provides the following actions:

1. Peel the ripened seeds from the pulp (if they have recently been obtained from the mother plant) or soak for a day in a solution of Zircon or Epina (for purchased options).
2. Prepare the soil substrate by mixing equal parts of peat and sand.
3. Spread the soil into separate cups with drainage holes and moisten it a little.
4. Deepen each prepared seed into the soil mixture by 0.5-1 cm and cover with a bag.
5. Take the seedlings to a place warm and illuminated by the sun, with a temperature in the range + 25 ... + 30 ° С.

With further care, the soil must be kept moist and ventilated seedlings daily, while protecting them from direct sunlight. Upon reaching a height of 4-5 cm, the grown seedlings are transplanted into pots with a diameter of 7 cm and moved to a constant place of growth, no longer covering the planting.

At this stage of development of dracaena, the room temperature should be kept within + 21 ... + 24 ° C. When plant propagation by seed method, one should not hope for the rapid growth of young shoots, because often this process stretches for 30-180 days.

Video: how to grow dracaena from seeds

Stem cuttings

Propagation of the plant by apical or stem cuttings also occurs in the spring and is suitable for those gardeners who want to have a large number of new plants for a limited period of time.

Important! If long-term transportation of prepared cuttings is planned, it is better to treat the places of their cuts with paraffin: this way they will retain their ability to form a root system longer.

The landing process in this case consists of the following steps:

1. Preparation of cuttings by cutting part of the main or lateral stem of the mother plant. The length of such a segment should not be less than 5–20 cm, and the cut itself is best performed on leaf scars.
2. The rooting of chopped cuttings in sand or peat. It can be done in two ways: rooting (by vertical (the lower part 2-3 cm deepens into the substrate) and horizontal (cuttings are simply laid on the soil). In both cases, the room temperature must be maintained at + 20 ... + 24 ° C. Tanks with cuttings can be covered with glass or oilcloth.
3. Transplant into a permanent pot. As soon as the roots appear strong, they can be moved to a separate container with a good drainage system and nutrient soil. Usually, the germination process takes no more than 1 month.

Apical cuttings

This method of propagation of dracaena is often called crown propagation, when the upper part of the stem is cut with a secateurs along with a bunch of leaves. The length of the obtained segment should be at least 10-15 cm, which will facilitate further work with the received planting material. The cutting angle is not critical, therefore, it can be both flat and made obliquely, but always smooth and without damage to the bark (the slightest burr can cause the stem to rot).

As in the previous case, the rooting of the cuttings is carried out in sand, vermiculite or in ordinary water at room temperature, and after the appearance of a sufficient number of strong roots, the harvested part of the plant can be transplanted into a separate planting tank, with the drainage layer laid. Each stalk is deepened into the substrate by 2-3 cm, watered and covered with a cut bottle so that it takes root more quickly. The temperature in the room with such seedlings at first should not fall below + 22 ... + 24 ° C.

Video: propagation of dracaena by apical cuttings

Aftercare for indoor plants

After the planting material is planted, a period of active growth and development of dracaena begins, requiring certain knowledge from the grower. Many standard actions are performed in the usual sequence, but at the same time, and they have their own characteristics, which must be paid attention to. Let's consider each of them.

Feeding and watering

Regardless of the season, the soil should be moistened in a pot with dracaena only after it dries to a depth of 2-3 cm or more. In the summer, this happens on average 1-2 times a week, and with the advent of cold weather and the rest period, the amount of watering decreases to two times a month. However, these indicators are also approximate, because much here depends on the humidity in the room and the type of dracaena (plants with wide leaves spend faster on accumulated moisture than representatives with narrow leafy plates).

Did you know? In the development of dracaena, as in the life of people, there are three main periods: youth, maturity and old age. In the mature period, the plant enters only after 35 years of active development, but old age lasts even longer, because the total lifespan of some tree species can be thousands of years.

As for water for irrigation, it must be at room temperature and without impurities of chlorine or other additives harmful to plants. In addition to regular watering, fertilizing will be equally important for the tree, often combined with the introduction of liquid into the soil. Typically, the fertilizer period begins in the first warm months and ends in mid-November, 2-3 weeks before dracaena rest.Complex mineral fertilizers for flower plants (sold in gardening shops) and organic solutions of horse manure or mullein are excellently suited for the role of nutritional compounds. True, in the latter case, such mixtures can be used only 1-2 times per season, choosing a granular form or the form of a liquid concentrate (diluted in water in a proportion of 1:10). In the summer period, the frequency of application of mineral compounds should not be lower than 1-2 times per month.

Trimming and shaping a bush

Pruning dracaena is a vital event for her, which is performed for several main reasons:

• to maintain the compact size of a houseplant;
• to enhance decorative properties (rejuvenation);
• for sanitary purposes.

The planned forming pruning is best performed during the active growth of the tree, when the movement of juice occurs inside it. Sanitary pruning is sometimes performed on an emergency basis (often due to the breaking of the stem) and involves its removal. In addition, it is also relevant for yellowed or withered leaves that only consume plant energy reserves. The first pruning of the plant can be carried out when it reaches a trunk of 30 cm (from the soil line to the first upper leaves).

Cut off any part of the leafy or bare trunk, but always under sterile conditions, using a disinfected tool. With a strong growth in width, it is possible to remove the side shoots, but with the mandatory preservation of small stumps, about 2-3 cm long. When performing any type of pruning, it is imperative that the dracaena be completely healthy, because this is the only way it will tolerate such an intervention and continue its active development.

Video: Dracaena pruning

Plant transplant

When grown at home, dracaena transplantation is often performed once every 2-3 years, replacing a cramped pot with a free one. However, the active growth of the tree is not the only possible reason for the forced change of its place of growth.

Important! To compact the soil and make the plant more stable, you can gently tap the pot on the table, thereby ramming the substrate.

Other grounds for such an intervention include:

• a recent purchase, especially if the seedling is in a small plastic container with a low-nutrient substrate;
• overflow of dracaena during watering (transplanting into new soil will help to avoid decay of the root system);
• the invasion of pests, many of which may be inside the soil substrate;
• degradation of the nutritional value of the land due to natural depletion due to prolonged use.

In any of these cases, to complete the procedure you will need a new pot of a suitable size, a new soil composition, drainage (for example, expanded clay), a spray bottle with water and a pruning shears.

The transplant process takes place in the following sequence:

1. Before moving the plant to a new container, do not water it for 1-3 days to facilitate the task of extracting it from the old pot.
2. Prepare a new tank, fill it with a drainage layer (at least 3 cm thick), and then the main soil (up to half the pot).
3. Turn the pot over the plant and pat your hand on the bottom to release the tree along with the earthen lump, without damaging the rhizome.
4. Inspect the root system and use a pruner to cut off all damaged roots, be sure to treat the resulting slices with powdered charcoal (it will help prevent decay processes).
5. Sprinkle the rhizome with spray water and place in a new flower pot, gently spreading all the roots.
6. Fill the remaining space with the prepared soil mixture and moisten it a little.
7. At the end of the procedure, make sure that the dracaena is stable in the pot, not leaning to the side. True, it is still not worth it to heavily fill the trunk with earth, otherwise it will only complicate further watering of the plant.

Video: dracaena transplant

Plant diseases and pests

Like any other plant, dracaena is not immune from pests and various diseases, which often lead to errors in the care of the tree.

Most often, gardeners have to deal with such problems:

1. Alternariosis - characterized by the appearance of pale brown spots with a bright center, which can be scattered not only on the leaves, but also on the trunk of the plant. Over time, the tissue in such places die off and the leaves wither.
2. Heterosporosis - manifests itself in elongated light areas with a red border, which are subsequently drawn out by a greenish-gray coating.
3. Bacteriosis - the tips of the leaves acquire a dark brown color, and small roundish “sores” form on the trunk and petioles. Healthy tissues are usually separated from the affected tissues by a wide yellow stripe, slightly oily to the touch.
4. Fusarium - characterized by the appearance of yellow patches on the plant (in the direction from the bottom up), with a “watery” border along the leaf contour. The upper part of the trunk quickly fades, and it becomes thinner and dries out. In some cases, fusarium leads to the spread of brown spots throughout the plant.
5. Wet (bacterial) rot - It is clearly visible by watery spots on all parts of the plant, which eventually lead to the complete soaking of the affected areas.

Unfortunately, this is not a complete list of possible ailments of dracaena, so do not be surprised if traces of gray, brown rot or brown spotting appear on the tree. In some cases, the plant also suffers from powdery mildew, which is manifested by brown bloom on the leaves.

As for pests, when growing dracaena, you often have to deal with such parasites:

1. Shield (leaves round brown spots on the wrong side of the leaf and can lead to blackening of the soil in the pot).
2. Spider mite (it is easy to recognize by the thin, almost transparent threads densely braiding the petioles, as well as by the brown dots on the wrong side of the leaf plate).
3. Thrips (discolor the plant and leave small black dots on the wrong side of the plant, sometimes complemented by thin silver scratches).
4. Smoldering (If you look at the dracaena under a magnifying glass, you can notice significant colonies of small insects densely sticking to the underside of the leaves and the upper part of the trunk).
5. Mealybug (leaves small clumps of gray plaque in the axils of the leaf plates, because of which they quickly turn yellow and dry).

For each individual problem, there are methods for solving them, most often consisting in the use of insecticidal (for example, Iskra-Bio, Calypso, Actelik) and fungicidal (Quadris, Fitosporin-M, Fundazol) . It is also possible to treat dracaena with independently prepared solutions and decoctions, but you should approach the use of alternative recipes very carefully so as not to burn delicate tissues and not aggravate the situation.

Did you know? According to its medicinal properties, dracaena juice is equal to the juice of famous aloe; It has an antioxidant effect and can be used to strengthen the heart muscle and the human immune system.

Useful Care Tips

When growing garden or ornamental plants, the experience of professional gardeners is very important, so we offer you some general recommendations that will help in the care and preservation of the decorative properties of dracaena:

1. To prevent the tips of the leaves from drying out, always control the humidity level in the room and the absence of drafts.
2. Soft and twisted leaves may indicate hypothermia of the plant, and often for the appearance of these symptoms, just one night spent in a cold room is enough.
3. Even if you grow sun-loving varieties of dracaena, it is better to protect them from direct sunlight, which can lead to the appearance of dry bright spots on the leaves.
4. When rooting cuttings in water, always add a tablet of activated carbon, which will protect the root system from decay.
5. The lower leaf plates of a tree under normal conditions look good for 2-3 years, so if they started to turn yellow earlier, it is worth revising the lighting mode and the humidity level in the room.
6. An overly bright leaf color sometimes indicates an excess of nitrogen fertilizers or a lack of light, so before looking for a reason in other features, it is worth considering this probability.
7. Good branching of dracaena is promoted by high humidity and a sufficient amount of light, but in some cases this is not enough. Be sure to consider the variety of the plant, because, for example, Dracaena Sander is always characterized by limited branching.

In general, planting and further care for dracaena cannot be called a very difficult task, so even with a responsible approach to the cultivation process, even a beginner gardener can easily cope with it.